![]() With that noted, go ahead and remove the sticker if present. ![]() Now even if you drop the blue cap and don’t remember in which orientation it came off, you can put it back the right way. This indicates the first pin in the jumper block that is hiding under the blue cap. One corner has a bump on the side and the number “1” printed n the board under it. There are systems where the jumper block is under a white cap but the rest of this article will use blue.īefore you remove the sticker and void your warranty, which may be almost about to run out at this point anyway. This sticker may be missing on your G3 but typically if it has never been removed and put back, the original glue is still holding this sticker firmly in place. Next to it is a blue block with a “VOID warranty if seal is broken” sticker over it. Open the Mac and locate the CPU heat sink. This was the first overclock I ever did back in 1999. Overclocking a G3 B&W is remarkably easy. Overclocking the Sonnet Duet 1.8GHz (MDD/X-Serve Model). ![]() Overclocking the Power Mac G4 MDD (Dual-CPU).Overclocking the Power Mac G4 QuickSilver (Dual-CPU).Overclocking the Power Mac G4 QuickSilver (Single-CPU).Overclocking the PowerBook G4 (15-inch Double-Layer SD).The risks are yours and I am not responsible for any issues that come from using the information on this page. Also by overclocking your CPU, you may damage it beyond repair. While I have personally tested/used most of the information on this page, there may be wrong information. If you want to know about power supplies have a look here for pinouts etc. This page will be updated over time as I overclock more. I figured I have enough materials to slap a page together with all the resources on it.
0 Comments
Leave a Reply. |